Bertazzoni F30 CON XT Guia de Resolução de Problemas Página 1

 INSTALLATION,USE&CAREMANUAL 30”BUILT‐INOVEN F30CONXEF30CONXTF30PROXF30PROXEF30PROXT 310676

10INSTALLATION INSTRUCTIONS INSTALLER: PLEASE LEAVE THESE INSTRUCTIONS WITH THE OWNER. Electrical connection CAUTION: Before installing the oven,

11WIRING DIAGRAM Models: F30PROX - F30PROXE - F30PROXT

12WIRING DIAGRAM Models: F30CONXE - F30CONXT

13 CUT-OUT DIMENSIONS IMPORTANT Kitchen cabinets shall be made of materials capable of withstanding temperatures at least (65°C) above room temperat

14INSTALLING THE OVEN STEP 1 Fix the supplied skid plates to the cabinet floor. STEP 2 Prepare the door for removal. Flip up the locking clamps

15GETTING STARTED 1 Control Panel (KNOBS only presents on PRO models) 2 Cooling exhaust 3 Self-clean cycle door lock 4 Lights 5 Food probe po

16When inserting a rack, always check that the safety notches are at the back. To remove racks, raise them upwards and pull out. TELESCOPIC RACKS T

17USING THE LCD DISPLAY DESIGN SERIES OVENS (CON MODELS) PROFESSIONAL SERIES OVENS (PRO MODELS) A Touch control areas B LCD Display C Te

ICONS LEGEND Timer Light Settings menu Start Scroll left/right and up/down Confirm selection Remove selection or leave menu Stop cooking

19SETTINGS Activate SETTINGS menu with Select field with and confirm Set the desired values with and confirm Leave menu Notes ECO mo

BERTAZZONI SpA Via Palazzina 8 42016 Guastalla RE ITALY WWW.BERTAZZONI-ITALIA.COM FROM THE DESK OF THE PRESIDENT Dear new owner of a Bertazzoni

20 BEFORE USING THE OVEN Before using the oven for preparing food:  Remove the protective film from the oven door and control panel  Remove all acc

21BASIC OPERATION - DESIGN SERIES MODELS START Activate the oven by touching any control area for 2 seconds. Start programming with Select COOKIN

22BASIC OPERATION – PROFESSIONAL SERIES MODELS START Activate the oven by turning the COOKING MODE knob (right) Select COOKING MODE by turning the

23TIME MANAGEMENT MENU – TIMER, DELAY/END COOKING, FOOD PROBE START After programming the oven for cooking, touch or to enter the time management

24DELAY START The oven will start at a desired time. Activate DELAY START Set desired time before oven will turn on and confirm Leave menu The

25 Connect the probe jack to the port located in the upper left side of the oven cavity. Place the food in the oven and confirm The display will

26COOKING MODES GUIDE MODE DETAILS USE FOR/TIPS BAKE Bake and broil elements ON Convection OFF Temperature 37°C – 260°C Use lower 2 shelf levels

27BROIL / CONVECTION BROIL The broil element operates on 4 different power levels. The element is heated for the first 3 minutes at maximum power and

28 TIPS FOR BEST RESULTS - BAKING CHECK PACKAGE DIRECTIONS FOOD PAN SIZE cm TEMPERATURE C COOKING TIME (minutes) LEVEL Cookies 30x38 Cookie Shee

29 TIPS FOR BEST RESULTS - DEHYDRATE FOOD PREPARATION APPROXIMATE TIME (hrs) DONE WHEN… Apples Cut in 5mm slices and dip in 1/4 cup lemon juice + 2

3 TABLE OF CONTENTS APPLIANCE INFORMATION ______________________________________________ 4IMPORTANT SAFETY INSTRUCTIONS _______________________

30 ASSISTANT FUNCTION Available on XT models only Developed with the help of Italian professional chef consultant Roberto Carcangiu, Bertazzoni’s

31

32START Activate the oven by touching any control area for 2 seconds. Start programming with Select ASSISTANT with or with right knob and conf

33Important Pre-programmed sequences have been calibrated for cooking food starting from room temperature. If using frozen food for a dish, defrost

34 SAVE The ASSISTANT stores your latest cooking sequence for future use. Select ASSISTANT with or with right knob and confirm Select SAVE wi

35 RETRIEVE To retrieve a previously stored personal sequence follow these simple steps. Select ASSISTANT with or with right knob and confirm S

36 SABBATH MODE This special program is designed for religious observances. START Activate the oven by touching any control area for 2 seconds. St

37SELF-CLEANING CYCLE DESCRIPTION In the self-cleaning cycle, the oven cavity is heated to very high temperatures to burn off any residue on the ov

38CLEANING THE OVEN FRONT Clean spills from the front of the appliance immediately. Spills may cause discoloration of the glass and steel surfaces.

39 REPLACING THE OVEN LIGHTS WARNING! Disconnect power before servicing unit. To replace the oven light bulb, remove the protection cap. It is not

4 APPLIANCE INFORMATION MODEL _____________________________________________________ DATE INSTALLED _________________________________________

40TROUBLESHOOTING GUIDE OVEN PROBLEM POSSIBLE CAUSES AND/OR REMEDY Oven does not function Range is not connected to electrical power. Ask a profes

41 BERTAZZONI SpA Via Palazzina 8 42016 Guastalla RE ITALY WWW.BERTAZZONI-ITALIA.COM

5 THIS APPLIANCE HAS BEEN DESIGNED FOR NON-PROFESSIONAL DOMESTIC USE. This appliance conforms with the regulations of European directive 2002/95

6inadequacy of an effective grounding system or the failure to adhere to national and local electrical codes. The oven should not to be operated unt

7Only use the food probe supplied with the oven. Contact Bertazzoni Service if you need to purchase a new probe. To prevent damage, remove the food p

8PRODUCT SPECIFICATION PROFESSIONAL SERIES OVENS (PRO MODELS) Electrical requirements 120/240V - 5500W (24 A max) or 120/208V – 4400W (21 A max).

9PRODUCT SPECIFICATION DESIGN SERIES OVENS (CON MODELS) Electrical requirements 120/240V - 5500W (24 A max) or 120/208V – 4400W (21 A max). Upper